Menu

P switch ON / OFF power switch

P switch ON / OFF power switch

Price: $100.77 Ex Tax: $100.77
Brand: : SERVONAUT
Product Code: P Switch
Availability: In Stock

Available Options


Int Freight (+$35.00)
      
Roof Lights
RC light option Light switches
Scale
1/14 RC Scale Light switches

Advance P switch is an electronic device that can be used to turn ON and OFF the electronics in all construction and truck models

. The P Switch is designed as electronic power switch for receiver power supply or turn On/Off the battery in your models. You do not need any additional devices, for control electronic switch, you need your finger only.

  •   Perfect safety and robustness.

  •   Virtually unlimited number of switching cycles.

  •   Last power-on status is stored in the internal memory.

  •   Configurable touch sensitivity.

  •   Very low standby current.



    FEATURES
    The  P switch is an electronic device that can be used to turn ON and OFF the electronics in

    your RC truck or construction model. The P switch is designed as electronic power switch for receiver power supply or turn On/Off ignition in your models. You do not need any additional devices, for control electronic switch, you need your finger only.

    •   Perfect safety and robustness.

    •   Virtually unlimited number of switching cycles.

    •   Last power-on status is stored in the internal memory.

    •   Configurable touch sensitivity.

    •   Very low standby current.


    page1image1014016 page1image1014208 page1image1004032 page1image1014592page1image984000 page1image994560 page1image985152 page1image991104page1image987072 page1image992256 page1image984576 page1image1037184page1image1037376 page1image1038144 page1image1032768 page1image1041792page1image1046208 page1image1033344 page1image1030016page1image1027136 page1image1022912 page1image1023680page1image1020800page1image927104 page1image981824page1image976640 page1image978176page1image975296

    CONNECTION AS RECEIVER BATTERY SWITCH
    Plug the device between receiver and battery. If you use a BEC, plug the Touch Power Switch between battery and the BEC.

    page1image15206016

    1

    page2image15258912

    CONNECTION TO SWITCH ON/OFF IGNITION

    page2image15260992


    INSTALLATION
    Place the P switch anywhere on the
     outside of the model . Please note,

    that if you install the switch inside the, the maximum allowed surface thickness must not exceed 3mm and the material must be non-conductive (wood, glass fiber, etc.).

    Make the status LED visible from outside the  and put the “touch swipe” sticker on top of the touch surface. Connect the battery to the Touch Switch and briefly touch the button at OFF position. Status LED should start slowly blinking. If not, please increase the touch sensitivity parameter in the device configuration.

    After the LED starts blinking, swipe your finger from “OFF” position to the “ON” position. The LED will increase blinking frequency. At this moment, release the touch button. The main output will stay activated.

    page2image15262240

    Installation inside/outside the fuselage: 1. Touch Switch, 2. Status LED, 3. Double-sided adhesive tape, 4. Fuselage (max. 3mm in case of installing inside), 5. Hole for LED (3mm) or electronics. 6. Sticker.

    2

    page3image15297504 page3image15297088

    Turn off: Slide your finger from left to right Turn on: Slide your finger from right to left.



Write a review

Note: HTML is not translated!
    Bad           Good
Roof Lights
RC light option Light switches
Scale
1/14 RC Scale Light switches
Tags: P switch

Whatsapp Support
CSMI
How can I help you?